FEATURES & FUNCTIONS 2
4.Still supporting the upper section of the wakeboard tower, install the two short supports ④ using two screw knobs on each side. Install the teth- ered rings ⑤ into the ends of the upper tower support screw knobs to prevent them from loosening or coming out during operation.
5
4
5.Carefully store the remaining screw knobs and the tower supports in a storage compartment in the boat.
Raising
1.Support the tower and attach the tower supports on both sides, leav- ing the screw knobs slightly loose.
2.While the assistant is pushing the upper tower section upward slightly, carefully thread the screw knobs into the forward pivot points into the tower base.
3.Once all of the knobs are threaded in, make sure each one is tight- ened securely. Install the tethered rings into the ends of the upper tower support screw knobs to pre- vent them from loosening or com- ing out during operation. NOTICE:
Be sure to use the tethered rings to secure the upper tower sup- port knobs. Otherwise the knobs could loosen and be lost if they fall out.
5