3 Operation

2)Attach the engine shut-off cord to your PFD. Install the cord clip onto the engine shut-off switch by push- ing the clip groove over the nut beneath the knob. Be sure the cord is not wrapped around the steering wheel or tangled in the controls.

Engine shut-off switch

Clip with cord

TIP: It is not possible to start the engine with the clip removed from the engine shut-off switch. However, the starter motor will turn the engine over.

3)Put the control levers in the Neutral position. The starter motor will not operate unless the shift lever is in Neutral. Turn the ignition key to “Start.” When the engine starts, release the key. If the engine does not start after 5 seconds of crank- ing, release the key. Wait at least 15 seconds before trying to start the engine again.

3-16