Operation 3

Bimini™ Top (212X MODEL)

The Bimini top is normally covered and secured to the top rail of the Wakeboard Tower. To deploy the top, follow the steps below:

1)Unclip the two fasteners that hold the Bimini storage cover and top to the Wakeboard Tower rail. Remove the storage cover.

①

②

2)Unwrap the top canvas and attach the three zippered flaps around the rear top rail of the Tower.

3)Push the canvas and top frame forward. Attach the front bow of the frame to the Wakeboard Tower with the lock pins ①. Unclip the two front vertical support poles. Pull them down and attach them to the Wakeboard Tower with the lock pins ②.

Do not exceed 45 mph (72 km/h) with the Bimini top in the up position.

Storing the Bimini Top

1)Remove the pins holding the front vertical support poles and the front bow to the Wakeboard Tower. Pull the top back against the Wakeboard Tower.

2)Roll the fabric around the frames and zip the storage cover into place.

Removing the Bimini Top

1)Follow the steps for Storing the Bimini Top

2)Remove the lock pins holding the Bimini top to the Wakeboard Tower.

3)The top can now be removed from the boat.

When reinstalling the Bimini top, simply reverse the removal steps making sure the lock pins are fully engaged.

See page 4-4 for Bimini care informa- tion.

3-13