Yamaha CXA5000BL ■Configuration, ■Setting Pattern, ■Setting Data Copy, Speaker (Manual Setup), •Level, ❑Front, ❑Center, •Distance, •Configuration, •Parametric EQ

Speaker (Manual Setup)Configures the speaker settings manually.■Setting PatternRegisters two speaker setting patterns and switches between them.

When you configure the following speaker settings, the settings will be memorized in the selected pattern.

•Measurement results (Auto Setup)•Configuration•Distance•Level•Parametric EQ

Settings

Pattern1 (default), Pattern2

•The setting pattern currently selected is shown at the top of the “Auto Setup” and “Manual Setup” screens.

•This function is useful when you want to save certain settings according to the varying conditions of your listening environment. For example, if you want to switch the settings when curtains are open or closed, you can save the settings suited for each condition and switch between them.

■Setting Data CopyCopies the “Setting Pattern” parameters in the specified direction.

Choices

Pattern1 > 2	Copies the “Pattern1” parameters to “Pattern2”.
Pattern2 > 1	Copies the “Pattern2” parameters to “Pattern1”.

■ConfigurationConfigures the output characteristics of the speakers.

•When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm (6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).

❑FrontSelects the size of the front speakers.

Settings

	Select this option for large speakers.
Large	The front speakers will produce all of the front channel frequency
	components.
	Select this option for small speakers.
Small (default)	The subwoofer will produce front channel low-frequency components
	lower than the specified crossover frequency (default: 80 Hz).

• “Front” is automatically set to “Large” when both “Subwoofer 1” and “Subwoofer 2” are set to “None”.

❑CenterSelects whether or not a center speaker is connected and its size.

Settings

	Select this option for large speakers.
Large	The center speaker will produce all of the center channel frequency
	components.
	Select this option for small speakers.
Small (default)	The subwoofer or front speakers will produce center channel
	low-frequency components lower than the specified crossover
	frequency (default: 80 Hz).
None	Select this option when no center speaker is connected.
	The front speakers will produce center channel audio.

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 106