Yamaha CXA5000BL ■DC OUT, ■Trigger Output1, Trigger Output2, Source, Manual, ❑Power Mode, ❑Target Zone, ❑Trigger Mode, Configures the DC OUT jack setting

■Trigger Output1, Trigger Output2

Sets the TRIGGER OUT 1–2 jacks to function in sync with the power status of each zone or input switching.

❑Target ZoneSpecifies the zone with which the TRIGGER OUT jack functions are synchronized.

Settings

❑Trigger ModeSpecifies the condition for the TRIGGER OUT jack to function.

Main

When “Trigger Mode” is set to “Power”, electronic signal transmission is synchronized with the power status of the main zone.

When “Trigger Mode” is set to “Source”, electronic signal transmission is synchronized with the input switching in the main zone.

Settings

Power (default)

The TRIGGER OUT jack functions in sync with the power status of the zone specified with “Target Zone”.

Zone2

When “Trigger Mode” is set to “Power”, electronic signal transmission is synchronized with the power status of Zone2.

When “Trigger Mode” is set to “Source”, electronic signal transmission is synchronized with the input switching in Zone2.

Source

The TRIGGER OUT jack functions in sync with the input switching in the zone specified with “Target Zone”.

An electronic signal is transmitted according to the setting made in “Source”.

Zone3

When “Trigger Mode” is set to “Power”, electronic signal transmission is synchronized with power status of Zone3.

When “Trigger Mode” is set to “Source”, electronic signal transmission is synchronized with input switching in Zone3.

Manual

Source

Select this to manually switch the output level for electronic signal transmission with “Manual”.

Zone4

When “Trigger Mode” is set to “Power”, electronic signal transmission is synchronized with power status of Zone4.

When “Trigger Mode” is set to “Source”, electronic signal transmission is synchronized with input switching in Zone4.

Specifies the output level of the electronic signal transmitted with each input, switching when “Trigger Mode” is set to “Source”.

Choices

AV 1–7, V-AUX, AUDIO 1–4, PHONO, TUNER, (network sources), USB, MULTI CH

Settings

All (default)

When “Trigger Mode” is set to “Power”, electronic signal transmission is synchronized with the power status of any zone.

When “Trigger Mode” is set to “Source”, electronic signal transmission is synchronized with the input switching in any zone.

Low

Stops the electronic signal transmission when you switch to the input source specified in this option.

■DC OUTConfigures the DC OUT jack setting.

High (default)

Manual

Transmits the electronic signal when you switch to the input source specified in this option.

❑Power Mode

Selects how to supply power to the Yamaha AV accessory connected to the DC OUT jack.

Switches the output level for electronic signal transmission manually when “Trigger Mode” is set to “Manual”. This setting can also be used to confirm proper function of the external device connected via the TRIGGER OUT jack.

Choices

Low	Stops the electronic signal transmission.
High (default)	Transmits the electronic signal.

Settings

	Continuous (default)	Supplies power through the DC OUT jack continuously regardless of
	Continuous (default)	the power state (on/standby) of the unit.
		the power state (on/standby) of the unit.

	Main Zone Power	Supplies power through the DC OUT jack only when the main zone is
	Main Zone Power	turned on.
	Sync.	turned on.
	Sync.	(This setting may not work properly on some accessories.)
		(This setting may not work properly on some accessories.)

CONFIGURATIONS ➤ Configuring various functions (Setup menu)	En 120