NetworkConfigures the network settings.
6To save the changes, use the cursor keys to select “OK” and press ENTER.7To exit from the menu, press ON SCREEN.■Network Standby

Selects whether the unit can be turned on from other network devices (network standby).

Settings

Off (default)

Disables the network standby function.

On

Enables the network standby function.

(The unit consumes more power than when “Off” is selected.)

■IP AddressConfigures the network parameters (such as IP address).❑DHCPSelect whether to use a DHCP server.

Settings

■MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.

❑FilterEnables/disables the MAC address filter.

Settings

Off

Does not use a DHCP server. Configure the network parameters manually. For details, see “Manual network settings”.

Off (default)

Disables the MAC address filter.

Enables the MAC address filter. In “MAC Address 1–10”, specify the

On (default)

Uses a DHCP server to automatically obtain the unit’s network parameters (such as IP address).

OnMAC addresses of the network devices that will be permitted access to the unit.

■Manual network settings1Set “DHCP” to “Off”.2Use the cursor keys (qw/ ) to select a parameter type and press ENTER.

IP Address

Specifies an IP address.

Subnet Mask

Specifies a subnet mask.

 

 

Default Gateway

Specifies the IP address of the default gateway.

 

 

DNS Server (P)

Specifies the IP address of the primary DNS server.

 

 

DNS Server (S)

Specifies the IP address of the secondary DNS server.

 

 

3Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value.

4To confirm the setting, press ENTER.5To configure another network parameter, repeat steps 2 to 4.
❑MAC Address 1–10

Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to the unit when “Filter” is set to “On”.

■Procedure

1 Use the cursor keys (q/w) to select “MAC Address 1–5” or “MAC Address 6–10” and press ENTER.

2Use the cursor keys (q/w) to select an MAC address number and press ENTER.

3Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value.

4To confirm the setting, press ENTER.

5To save the changes, use the cursor keys to select “OK” and press ENTER.

6To exit from the menu, press ON SCREEN.

CONFIGURATIONS ➤ Configuring various functions (Setup menu)

En 115