Manuals / Brands / Home Audio / Stereo Amplifier / Yamaha / Home Audio / Stereo Amplifier

Yamaha CXA5000BL ❑XLR jacks, XLR input jacks, XLR input jacks, XLR output jacks, XLR output jacks, Transmit analog audio signals. Use an XLR balanced cable

1 163

Download 163 pages, 16.7 Mb

❑XLR jacksTransmit analog audio signals. Use an XLR balanced cable.XLR input jacks

Match the pins and insert the “male” connector of the XLR balanced cable until you hear a click.

XLR balanced cable (male)

4

AUDIO

R

•When disconnecting the cable from the unit, hold down the PUSH button on the unit and then pull the connector out.

XLR output jacks

Match the pins and insert the “female” connector of the XLR balanced cable until you hear a click.

XLR balanced cable (female)

OUT

PRE

CENTER

• When disconnecting the cable from the unit, hold down the lever of the connector and then pull it out.

About the XLR jacks

•The pin assignments for the XLR jacks of the unit are shown below. Before connecting an XLR balanced cable, refer to the instruction manual of your device and verify that its XLR jacks are compatible with the pin assignments.

XLR input jacks		XLR output jacks
2. HOT	1. GND	1. GND	2. HOT
	3. COLD		3. COLD

PREPARATIONS ➤ Input/output jacks and cables	En 23

Contents

Owner’s Manual CONTENTS Playing back music stored on a USB storage device Playing back music stored on media servers (PCs/NAS) Playing back videos/audio in multiple rooms (multi-zone) Configuring playback settings for different playback sources CONFIGURATIONS95 Configuring sound programs/surround decoders Viewing information about the unit (Information menu) Configuring the system settings (ADVANCED SETUP menu) Controlling external devices with the remote control Page Accessories FEATURES What you can do with the unit Full of useful functions Useful tips ❑Connecting various devices (p.32) Playing nd sound with a single HDMI cable connection (Audio Return Channel: ARC) CINEMA DSP Optimizing speaker settings for the environment (YPAO) Unrivaled audio and video quality Expandable to meet diverse needs Part names and functions ■Inside of the front panel door 9 0 AB C DE GH IJ K L 9 ON SCREEN key 0 Menu operations keys Front display (indicators) A B 1HDMI OUT1/OUT2 2STEREO Rear panel 1 PHONO jacks 2 DC OUT jack 3 NETWORK jack 4 AV 1–4jacks E AUDIO 1–3jacks H MULTI CH INPUT jacks J PRE OUT (RCA) jacks F AUDIO 4 (XLR) jacks I ZONE OUT jacks Remote control 1 Remote control signal transmitter 2 SOURCE zkey SOURCE/RECEIVER key RECEIVER zkey ■Inside of the remote control cover I Sound mode keys J INFO key K Numeric keys L ZONE key PREPARATIONS General setup procedure 1Placing speakers Basic speaker configuration ■Placing speakers in your room ❑ 11.2-channelsystem ❑ 9.2-channelsystem (using rear presence speakers) ❑9.2-channelsystem (using surround back speakers) This speaker system uses the front presence speakers to produce a natural ❑7.1-channelsystem (using front presence speakers) ❑7.1-channelsystem (using surround back speakers) ❑5.1-channelsystem ❑Front 5.1-channelsystem ❑2.1-channelsystem Input/output jacks and cables ❑XLR jacks Transmit analog audio signals. Use an XLR balanced cable XLR input jacks XLR output jacks XLR input jacks 2Connecting the power amplifier and subwoofers ■Unbalanced connection Connecting subwoofers 3Connecting a TV ❑Necessary settings To use HDMI Control and ARC, you need to configure the following settings 2Configure the settings of the unit a Check that ARC is enabled on the TV b Switch the TV input to display video from the unit. c Press ON SCREEN ■Connection Method 2 (HDMI Control-compatibleTV) To use HDMI Control, you need to configure the following settings a Switch the TV input to display video from the unit. b Press ON SCREEN c Use the cursor keys to select “Setup” and press ENTER dUse the cursor keys (e/r) to select “HDMI” ■Connection Method 3 (TV with HDMI input jacks) ■Connection Method 4 (TV without HDMI input jacks) ❑COMPONENT VIDEO connection (with a component video cable) ❑S VIDEO connection (with an S-videocable) ❑VIDEO (composite video) connection (with a video pin cable) ■Connecting another TV or a projector 4Connecting playback devices ■S-videoconnection ■Composite video connection Connecting audio devices (such as CD players) Connecting to the jacks on the front panel Use the VIDEO AUX jack to temporarily connect a playback device to the unit ❑HDMI connection ❑MHL connection 5Connecting the FM/AM antennas 6Connecting to a network 7Connecting other devices 8Connecting the power cable 9Selecting an on-screenmenu language 10Optimizing the speaker settings automatically (YPAO) The following screen appears on the TV 6If desired, select the measuring options b Use the cursor keys to select a setting and then press ENTER When “Multi Position” is set to “Yes”: “Measuring at multiple listening positions (multi measure)” (p.46) ❑Angle Enables/disables the angle measurement Measuring at one listening position (single measure) (When angle measurement is enabled) Proceed to Step The following screen appears on the TV when the measurement finishes (When angle measurement is disabled) c Press ENTER to start the first angle measurement d In the same way, perform the angle measurement for the positions “2” and “3” 3Use the cursor keys to select “Save/Cancel” and press ENTER 4 To save the measurement results, use the cursor keys (e/r) to select “SAVE” and press ENTER Measuring at multiple listening positions 3 When the measurements at the positions you want (multi measure) to measure are completed, use the cursor keys to select “CANCEL” and press ENTER 4 Perform the angle measurement bPlace the supplied microphone base at the listening position you the position “1” 5Use the cursor keys to select “Save/Cancel” and press ENTER 6 To save the measurement result, use the cursor Checking the measurement results You can check the YPAO measurement results 1After the measurement, use the cursor keys to select “Result” and press ENTER The following screen appears 1 Measurement result items Reloading the previous YPAO adjustments In the “Setup” menu, select “Speaker”, “Auto Setup”, and then “Result” Use the cursor keys to select “Setup Reload” and press ENTER Error messages Warning messages Basic playback procedure Selecting the input source and favorite settings with one touch (SCENE) Configuring scene assignments Selecting setting items to be included as scene assignments Selecting the sound mode ■ Enjoying surround sound with ■Enjoying sound field effects without surround speakers (Virtual CINEMA DSP) ■Sound programs suitable for movies (MOVIE) ❑MOVIE THEATER ❑ENTERTAINMENT ■ Sound programs suitable for music/stereo playback ■Playing back 2-channelsources in multichannel (surround decoder) Enjoying pure high fidelity sound (Pure Direct) Enjoying compressed music with enhanced sound (Compressed Music Enhancer) Listening to FM/AM radio Registering favorite radio stations (presets) ■Registering a radio station Select a radio station manually and register it to a preset number Follow “Selecting a frequency for reception” 2Hold down MEMORY for more than 2 seconds TUNED PRE AMP PARTY W X Y Z - F M ■Holding HD Radio™ information display 1When the desired HD Radio information is displayed, press OPTION 2Use the cursor keys to select “Hold/Unhold” (Hold/Unhold) and press ENTER 3To exit from the menu, press OPTION ■HD Radio™ operation on the TV ■Displaying the Radio Data System information T r a f f i c P r o g r a m MUTE VOLUME Page Playing back iPod music Playback of iPod content Follow the procedure below to operate the iPod contents and start playback You can control the iPod with the menu displayed on the TV screen 1Press USB to select “USB” as the input source The browse screen is displayed on the TV ■Operating the iPod itself or remote control (simple play) 1Press MODE to switch to the simple play mode The TV menu screen turns off and iPod operations are enabled To display the TV menu screen, press MODE again 2Operate your iPod itself or the remote control to start playback ■Shuffle/repeat settings You can configure the shuffle/repeat settings of your iPod 1When “USB” is selected as the input source, press OPTION 3Use the cursor keys (e/r) to select a setting Playing back music stored on a USB storage device PLAYBACK ➤ Playing back music stored on a USB storage device Page Playing back music stored on media servers (PCs/NAS) 3Use the cursor keys to select an item and press 1When “SERVER” is selected as the input source, press OPTION Listening to Internet radio 1 Playback indicator http://yradio.vtuner.com Playing back iTunes/iPod music via a network (AirPlay) PLAYBACK ➤ Playing back iTunes/iPod music via a network (AirPlay) Playing back videos/audio in multiple rooms (multi-zone) Preparing the multi zone system Connect the device that will be used in other rooms to the unit ■Connecting an external amplifier and speakers to play back audio ■Connecting a video monitor to play back analog videos ■Connecting an HDMI-compatibledevice to play back videos/audio ■Operating the unit from another room (remote connection) Remote connections between Yamaha products Controlling Zone2, Zone3 or Zone4 1Press ZONE repeatedly to select a zone Each time you press the key, the zone to be operated switches 4 Start playback on the external device or select a radio station ■Other operations for Zone2, Zone3 or Zone4 Adjusting the volume (for Zone2 and Zone3 only) Press VOLUME or MUTE Selecting the input source and settings at once (SCENE) Press SCENE Viewing the current status Configuring playback settings for different playback sources (Option menu) ■Tone Control (Tone Control) Adjusting with the front panel controls aPress TONE/BALANCE repeatedly to select “Treble” or “Bass” bPress PROGRAM to make an adjustment ■Adaptive DRC (Adaptive DRC) ■Dialogue Adjust (Dialog Adjust) Adjusts the volume or perceive height of dialogue sounds ❑Dialogue Level (Dialog Lvl) ❑Dialogue Lift (Dialog Lift) ■Extended Surround (EXTD Surround) ■ Enhancer (Enhancer) ■Audio Mode (Audio Mode) Switches between stereo and monaural for FM/AM radio reception ■FM Mode (FM Mode) (Except for U.S.A. model) Switches between stereo and monaural for FM radio reception CONFIGURATIONS Configuring input sources (Input menu) ■Rename/Icon Select ■ Setup procedure 1 Use the cursor keys (e/r) to select a template and press the cursor key (w) ■Decoder Mode Sets the format of digital audio playback to “DTS” Configuring the SCENE function (Scene menu) 5Use the cursor keys and ENTER to change the setting Scene menu items ■Load Loads the settings registered for the selected scene ❑Device Control ■Save ■Reset Restores the default settings (p.53) for the selected scene 2Use the cursor keys to select “Sound Program” and press ENTER Sound Program menu items ■Settings for sound programs ■Settings for decoders Configuring various functions (Setup menu) Setup menu items Page Speaker (Manual Setup) Configures the speaker settings manually ■Setting Pattern Registers two speaker setting patterns and switches between them •Measurement results (Auto Setup) ❑Surround Selects whether or not surround speakers are connected and their sizes ❑Surround Back Selects whether or not surround back speakers are connected and their sizes ❑Front Presence ■Level Adjusts the volume of each speaker ❑Extra Bass Sets the speakers to produce the front channel low-frequencycomponents Adjusting while viewing the front display ■Test Tone Sound Configures the audio output settings ■Lipsync Adjusts the delay between video and audio by holding up the audio output ■Initial Volume Sets the initial volume when the receiver is turned on ■Pure Direct Mode Selects whether to output video signals during the Pure Direct mode (p.60) ■Dynamic Range ■VPS ■DAC Digital Filter ■Analog to Analog Conversion ■Video Mode ❑Resolution ❑Aspect 1Use the cursor keys (q/w) to select a preset number and press ENTER 2Use the cursor keys (q/w) to select an item 3Use the cursor keys (e/r) to select a setting and press ENTER HDMI Configures the HDMI settings ■HDMI Control Enables/disables HDMI Control (p.150) ❑TV Audio Input ■Standby Through ■Audio Output Selects a device to output audio ❑Amp Network Configures the network settings 6To save the changes, use the cursor keys to select “OK” and press ENTER 7To exit from the menu, press ON SCREEN ■Network Standby ■Network Name Multi Zone Configures the multi zone settings ■Main Zone Set Configures the main zone setting ■Zone2 Set, Zone3 Set Configures the Zone2 or Zone3 settings ❑Volume Enables/disables volume adjustments for Zone2 or Zone3 output ❑Max Volume ■Zone4 Set Configures the Zone4 settings ■Party Mode Set Enables/disables switching to the party mode (p.88) for each zone Changes the zone name (for Zone4) displayed on the front display or TV screen Function Configures the functions that make the unit easier to use ■Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source Example: assigning the OPTICAL (e) jack to the input source “AV 2” ■Trigger Output1, Trigger Output2 ❑Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized ❑Trigger Mode Specifies the condition for the TRIGGER OUT jack to function ■ Memory Guard ECO Prevents accidental changes to the settings Configures the auto-standbysetting ■ Auto Power Standby Language Types of information ■Audio Signal Displays information about the current audio signal ■Video Signal Displays information about the current video signal Configuring the system settings (ADVANCED SETUP menu) Selecting the remote control ID (REMOTE CON AMP) Changing the FM/AM tuning frequency setting (TUNER FRQ STEP) ■Changing the remote control ID of the remote control region Removing the limitation on HDMI video output (MONITOR CHECK) M O N I T O R C H E C K Backing up/recovering the settings (RECOV./BACKUP) R E C O V . / B A C K U P Updating the firmware (FIRM UPDATE) ■Firmware update procedure Checking the firmware version (VERSION) Check the version of firmware currently installed on the unit Controlling external devices with the remote control Use the numeric keys or cursor keys to enter the If “ERROR” appears, registration has failed. Repeat from Step 6To exit from the setup menu, press SETUP ❑TV operations ■Registering the remote control codes for playback devices 2Press SETUP 3Use the cursor keys (q/w) to select “PRESET” and press ENTER 4Press a corresponding input selection key and press ENTER 6To set another remote control code, repeat Steps 4 and Programming from other remote controls (learning) 2Use the cursor keys (q/w) to select “LEARN” and press ENTER 3Press one of the following keys depending on the type of your device For playback device: For TV: press TV z Editing device names Otherwise, the setting will be canceled. If this happens, repeat from Step 2Use the cursor keys (q/w) to select “RENAME” and press ENTER 7Repeat Steps 3 to 6 until all desired operations are learned 8To exit from the setup menu, press SETUP Operating multiple functions at once (macro) ■Enabling the macro operations 2Use the cursor keys (q/w) to select “MACRO” and press ENTER 3Use the cursor keys (q/w) to select “ON” and press 4To exit from the setup menu, press SETUP ■Programming macro operations 3Use the cursor keys (q/w) to select “EDIT” and press ENTER Press the macro operation key (RECEIVER “MACRO 1” appears in the display window (Example) Resetting the remote control configurations ■Clearing the remote control configurations 2Use the cursor keys (q/w) to select “CLEAR” and press ENTER “ALL” appears in the display window To apply the selection to all the corresponding keys, proceed to Step ■Erasing a function assigned to each key by learning 2Use the cursor keys (q/w) to select “ERASE” and press ENTER 5Hold down the key to be reset until “OK” appears on the window display 6Repeat Steps 3 to 5 until all desired key assignments are erased Updating the unit’s firmware via the network APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance Since we have small children, we want to set limitations on the Troubleshooting Audio Page Page FM/AM radio USB and network Error indications on the front display Glossary ■Others HDMI and video information Yamaha technologies Video signal flow ■Video conversion table Multi-zoneoutput ■Audio output ■Video output Information on HDMI HDMI signal compatibility Audio signals Video signals The unit is compatible with the video signals of the following resolutions: • VGA Reference diagram (rear panel) Trademarks Specifications USB Network Compatible Decoding Formats Audio Section Video Section FM Section AM section General Index