•To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”.

•To copy the parametric equalizer values acquired with “Auto Setup” (p.41) to the “Manual” fields for fine adjustment, select “PEQ Data Copy” and then an equalizer type.

4Use the cursor keys (e/r) to select a center frequency from the 7 preset bands (4 for subwoofer) and the cursor keys (q/w) to adjust the gain.

Setting range

Gain: -20.0 dB to +6.0 dB

5To fine-adjust the center frequency or Q factor (bandwidth), press ENTER repeatedly to select an item.

Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected band and the cursor keys (q/w) to adjust the gain.

Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and the cursor keys (q/w) to adjust the gain.

Setting range

Center frequency: 31.3 Hz to 16.0 kHz (31.3 Hz to 250.0 Hz for subwoofer)

Q factor: 0.500 to 10.080

6To exit from the menu, press ON SCREEN.

■Test Tone

Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect.

Settings

Off (default)

Does not output test tones.

SoundConfigures the audio output settings.■LipsyncAdjusts the delay between video and audio by holding up the audio output.❑Delay EnableEnables/disables the Lipsync adjustment for each input source.

Choices

AV 1–7, V-AUX, AUDIO 1–4

Settings

Disable

Disable the Lipsync adjustment for the selected input source.

Enable (default)

Enables the Lipsync adjustment for the selected input source.

 

 

❑Auto/Manual SelectSelects the method to adjust the delay between video and audio output.

Setting range

 

Adjusts the delay between video and audio output automatically when

 

a TV that supports an automatic lipsync function is connected to the

Auto (default)

unit via HDMI.

 

If necessary, you can fine-adjust the audio output timing in

 

“Adjustment”.

 

 

 

Select this option when you want to adjust the delay between video

Manual

and audio output manually.

On

Outputs test tones automatically when you adjust the speaker balance or equalizer.

Adjust the audio output timing in “Adjustment”.

•Even if “Auto/Manual Select” is set to “Auto”, the automatic adjustment does not work depending on the TV connected to the unit. In this case, adjust the delay manually in “Adjustment”.

CONFIGURATIONS ➤ Configuring various functions (Setup menu)

En 109