Yamaha CXA5000BL ■System, ■Network, ■Multi Zone, ■Audio Signal, ■Video Signal, ■HDMI Monitor, Types of information, Displays the system information on the unit

Types of information■Audio SignalDisplays information about the current audio signal.

	Format	Audio format of the input signal
		The number of source channels in the input signal
	Channel	(front/surround/LFE)
		For example, “5.1 (3/2/0.1)” means 5.1ch in total
Input		(3 front channels, 2 surround channels, and LFE)
	Sampling	The number of samples per second of the input digital signal
	Bitrate	The amount of data per second of the input bitstream signal
	Dialogue	The dialogue normalization level of the input bitstream signal
Output		The channels (PRE OUT jacks) from which signals are output

•Even when the unit is set to output bitstream signals directly, the signal may be converted depending on the specifications and settings of the playback device.

■Video SignalDisplays information about the current video signal.

HDMI Signal	Presence or absence of HDMI signal input/output
HDMI Resolution	Resolutions of input signal (analog or HDMI) and output signal (HDMI)
Analog Resolution	Resolutions of input signal (analog) and signal output at the MONITOR OUT
	jacks (analog)

■HDMI Monitor

Displays information about the TVs connected to the HDMI OUT jacks. Use the cursor keys (q/w) to switch between “OUT1” and “OUT2”.

Interface	TV interface
Video Resolution	Resolutions supported by the TV

■NetworkDisplays the network information on the unit.

IP Address	IP address
Subnet Mask	Subnet mask
Default Gateway	The IP address of the default gateway
DNS Server (P)	The IP address of the primary DNS server
DNS Server (S)	The IP address of the secondary DNS server
MAC Address	MAC address
Network Name	Network name (the unit’s name on the network) (p.116)
Status	The connection status of the NETWORK jack

■SystemDisplays the system information on the unit.

Remote ID	The unit’s remote control ID setting (p.125)
TV Format	The unit’s video signal type (p.125)
Tuner Freq. Step	(Asia model only)
	The FM/AM tuning frequency setting of the unit (p.125)
System ID	System ID number
Firmware Version	The version of firmware installed on the unit

•If the unit detects a newer firmware over the network, “!” (exclamation mark) appears at the upper right of the “Information” and “System” icons, and the corresponding message will be displayed in this screen. You can update the unit’s firmware by pressing ENTER in this screen and following the procedure in “Updating the unit’s firmware via the network” (p.136).

■Multi ZoneDisplays information about Zone2, Zone3 and Zone4.

Input	The input source selected for Zone2, Zone3 or Zone4
Volume	The volume for Zone2 or Zone3

CONFIGURATIONS ➤ Viewing information about the unit (Information menu) En 123