Yamaha CXA5000BL On the unit, hPress ON SCREEN, ❑Necessary settings, e Check the following, 2Configure the settings of the unit, gUse the cursor keys to select “On”

1 2 3 4 5 6 7 8 9 10

❑Necessary settingsTo use HDMI Control and ARC, you need to configure the following settings.

For details on settings and operating your TV, refer to the instruction manual for the TV.

1After connecting external devices (such as a TV and playback devices) and the power cable to the unit, turn on the unit, TV, and playback devices.

2Configure the settings of the unit.a Check that ARC is enabled on the TV.b Switch the TV input to display video from the unit. c Press ON SCREEN.

ON SCREEN	OPTION
		ON SCREEN
ENTER		Cursor keys
		ENTER
RETURN	DISPLAY

d Use the cursor keys to select “Setup” and press ENTER.eUse the cursor keys (e/r) to select “HDMI”.fUse the cursor keys (q/w) to select “HDMI Control” and press ENTER.gUse the cursor keys to select “On”.hPress ON SCREEN.

3Configure the settings for HDMI Control.

a Enable HDMI Control on the TV and playback devices (such as HDMI Control-compatible BD/DVD player).

b Turn off the TV’s main power and then turn off the unit and playback devices. c Turn on the unit and playback devices and then turn on the TV’s main power. d Switch the TV input to display video from the unit.

e Check the following.

On the unit: The input to which the playback device is connected is selected. If not, select the input source manually.

On the TV: The video from the playback device is displayed.

f Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control.

This completes the necessary settings.

If you select a TV program with the TV remote control, the input source of the unit will be automatically switched to “AUDIO 1” and the TV audio will be played back on the unit.

If you cannot hear the TV’s audio, check that “ARC” (p.114) in the “Setup” menu is set to “On”.

•If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again) the devices. It may solve the problem.

•If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on the TV.

•If the audio is interrupted while using ARC, set “ARC” (p.114) in the “Setup” menu to “Off” and use an audio cable (digital optical or stereo pin cable) to input TV audio to the unit (p.28).

•“AUDIO 1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO 1 jacks, use “TV Audio Input” (p.113) in the “Setup” menu to change the TV audio input assignment. To use the SCENE function (p.53), you also need to change the input assignment for SCENE(TV).

PREPARATIONS ➤ Connecting a TV En 27