46 Chapter 5—General Operation
D24—Owner’s Manual
Using Playback
The Playback function is used to play back recorded material.
1While the D24 is stopped, press the [PLAY] button.
Playback starts and the PLAY button indicator lights up.
2Press the [STOP] button to stop playback.
Playback stops and the PLAY button indicator goes out.
If the [REW] or [FF] button is pressed and held during playback, the D24 rewinds (8x)
or fast forwards (8x) respectively and returns to normal playback when the button is
released. You can go directly to play from either rewind or fast forward simply by press-
ing the [PLAY] button.
Using Fast Forward & Rewind
The Fast Forward and Rewind functions are used to fast forward and rewind at either
8x or 16x normal play speed.
1Press the [FF] button to fast forward, or the [REW] button to rewind.
The respective button flashes and fast forward or rewind runs at 8x normal play speed.
2Press the [FF] or [REW] button again for fast forward or rewind at 16x normal
play speed.
The respective button lights up continuously and fast forward or rewind runs at 16x
normal play speed.
3Press the [STOP] button to stop fast forward or rewind.
If the [PLAY] button is pressed during fast forward or rewind, the D24 stops, and then
starts playback.
Pressing and holding the [FF] or [REW] button during playback fast forwards or
rewinds respectively at 8x normal play speed. Releasing the [FF] or [REW] button
resumes normal playback.
Note: In Rehearse Standby mode, and during recording and rehearsal, the [PLAY]
button is used to punch in and out of recording. See “Transport Operation Table” on
page 27 for more information.