Yamaha D24 Using Roll-back, Setting the Roll-back Time

50 Chapter 5—General Operation
D24—Owner’s Manual
Using Roll-back
The Roll Back function rolls back from the current position in steps of between 1 and
30 seconds, the default being 5 seconds.
1Press the [ROLL BACK] button to roll back by the specified amount.
If the [ROLL BACK] button is pressed during playback, the D24 rolls back by the spec-
ified amount, and then continues playing.
Setting the Roll-back Time
The roll-back time is set using the Roll Back function.
1Press the [UTILITY] button.
The UTILITY indicator lights up.
2Use the JOG/DATA dial to select “ROLL BACK,” and then press the [ENTER]
button.
The currently set roll-back time appears on the display.
3Use the JOG/DATA dial to set the roll-back time from 1 to 30 seconds.
4Press the [ENTER] button to activate your selection, or the [CANCEL] button
to cancel the Roll Back time setting.
5Press the [UTILITY] button again to leave utility.
The UTILITY indicator goes out.
Current
position
Roll-back
time
Roll-back
time
ROLL
BACK
ROLL
BACK