Analog output
Select Stereo, Surround or 3D Sound. Factory setting is Stereo.
Surround : Select this setting when using equipment with a Dolby Surround Pro Logic decoder. In this setting the 5.1 audio channels (Dolby Digital,
3D Sound : In a setup without rear speakers (analog stereo output), this option remixes the six channels of digital multichannel (Dolby Digital,
The result is the listening sensation of being surrounded by multiple speakers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| off | on | off |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Sound |
| |
|
|
|
| Digital output |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| Analog output |
|
|
|
|
|
| |
|
|
|
|
| Stereo |
|
|
|
| ||
|
|
|
| Night mode |
|
| Surround |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| 3D sound |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connected audio system | Digital out | Analog out |
|
|
|
Amplifier or TV with two channel | Off | Stereo |
analog stereo |
|
|
|
|
|
Amplifier or TV with Dolby Surround | Off | Surround |
or Dolby Pro Logic |
|
|
|
|
|
Amplifier with two channel digital | PCM only | Stereo |
stereo |
|
|
|
|
|
A/V receiver with | All | Stereo or Sur- |
decoder (Dolby Digital, MPEG, DTS) |
| round |
|
|
|
Night mode
Night mode optimizes the dynamics of the sound with low volume playback for less disturbance in quiet environments.This only works for Dolby Digital audio on DVD video discs.
r Language settings
The preferred language can be adapted via the system menu bar.Also see ‘Initial setup Language.’ Settings can be changed for:
-Playback audio
-Recording audio
-Subtitle
-Menu (DVD Recorder system menus only)
Recording audio
You can set a preference for recording a stereo or secondary audio program. Select ‘Stereo’ or ‘SAP.’
This setting applies only if the broadcast contains stereo or SAP. SAP usually means a program is broadcast in a different language or with additional information.
Feature settings
Access Control
Access Control contains the following features:
Child Lock - When Child Lock is on, a
Parental Level - Allows the conditional presentation of
Change Country - Allows conditional presentation of DVD- Video discs rated according to country information. Change Code - To change the
Adapt disc format
This option is only available when a DVD+RW/+R disc recorded on a different brand of recorder is loaded.You can adapt the menu to your own recorder.
A DVD+RW/+R disc recorded on a different type of Recorder can play, but may not provide all features commonly available, such as the
the disc format can be adapted to this Recorder, after which these functions are available.
Status box
The status box displays the current status of the Recorder and the disc type loaded (see ‘Operation -
Off = always Off. Status boxes do not appear.
On = Status box appears with the system menu bar or is displayed temporarily (disappears after time- out) when changing the playback or record status.
Factory setting is ‘On.’
Auto resume
The Auto resume setting only applies to the last 20 pre- recorded DVD Video and Video CD discs you played.
If Auto resume is ‘On,’ playback will start from the point where it stopped the last time the disc played.
When Auto resume is ‘Off,’ the Recorder will start playing from the beginning of a disc. In this case, you can still
resume from the last point it stopped when 
appears on the TV screen by pressing 
.
Factory setting is ‘On.’
