Yamaha DRX-1 owner manual Country, Changing the 4-digit code

Rating 0 (displayed as ‘– –’):

Parental Control is not active.The disc will play in full. Ratings 1 to 8 (1 = childsafe - 8 = adults only):

The disc contains scenes not suitable for children. If you set a rating for the Recorder, all scenes with the same rating or lower will play. Higher rated scenes will not play unless an alternative is available on the disc.The alternative must have the same rating or a lower one.

If no suitable alternative is found, play will stop and you must enter the 4-digit code.

9Press ENTER/OK or t (left cursor) to confirm and press SYSTEM MENU to move the menu.

Country

See the disc case for details on whether it has Parental Level settings for specific countries. If it does not, this procedure is not necessary.

1Press SYSTEM MENU.

2Press t (left cursor) to select in the system menu bar.

3Press w (down cursor) repeatedly to select , then press u (right cursor).

4‘Access control’ will be selected in the features menu

. Press u (right cursor).

5Enter the four digit code using the 0-9buttons.

6Move to ‘Change country’ using w (down cursor).

7Press u (right cursor).

1		5	1en	off	no	off
				St. Pierre and Miquelon
	Access control			United States
	Status box			U.S.Minor Outlying Is.
	Auto resume			Virgin Islands (U.S.)
	Low power standby

8Select the country for which your disc is coded using w/v (down/up cursor).

9Press ENTER/OK or t (left cursor) to confirm. Press SYSTEM MENU to exit the menu.

Changing the 4-digit code

1Press SYSTEM MENU.

2Press t (left cursor) to select in the system menu bar.

3Press w (down cursor) repeatedly to select , then press u (right cursor).

4‘Access control’ will be selected in the features menu

. Press u (right cursor).

5Enter the old 4-digit code using the 0-9buttons.

6 Move to ‘Change code’ using w (down cursor).

1		5	1en	off	no	off
				Child lock		Features[ ]
	Access control			Parental level		[ ]
	Status box			Change country		[ ]
	Auto resume			Change code		[ ]
	Low power standby

7Press u (right cursor).

8Enter the new 4-digit code using the 0-9buttons.

9Enter the exact same code a second time and recon- firm by pressing ENTER/OK.

10Press SYSTEM MENU to exit the menu.

English

ACCESS CONTROL 39