Clearing a timer block
1Press TIMER on the remote control.
2Select ‘Timer list’ with w/v (down/up cursor).
3Press u (right cursor).
4Select the Timer Recording you want to clear with w/ v (down/up cursor).The selected Timer Recording will be highlighted in blue.
5Press CLEAR.
➤ The Recording you selected will appear alone on the screen.
6Confirm with ENTER/OK.
➤ Timer Cleared will appear at the bottom of the screen briefly.Then the Timer List will reappear.
7Remove the menus by pressing TIMER, repeatedly if necessary.
Note:
If Timer Recordings overlap or conflict with each other, they will be highlighted in red in the Timer List.
How to stop a Timer Recording in progress
●A Timer Recording that is already in progress can only be aborted by pressing POWER (B/I) on the remote control or STANDBY/ON on the front of the Recorder.
