6Select the time zone if the DVD Recorder is tuned to the PBS channel of a different time zone than yours.

7Confirm each entry with ENTER/OK.

8To end, press SYSTEM MENU repeatedly to remove the menus.

The time and date will be set by the specified channel the next time you switch to Standby power mode.

The DVD Recorder downloads from the specified channel, if possible. If the specified channel does not carry date and time information, the message appears ‘Clock not set.’

The Automatic Time and Date screen will reappear automatically.You can repeat the procedure with a new channel number.

Time/Date Manually

If the time in the DVD Recorder display is not correct, the clock must be set manually.

Time/ date

Manual

 

 

 

Time

03:46

AM/ PM

PM

Year

2001

Month

06

Date

16

Daylight Saving

On

To exit press

SYSTEM MENU

1In the installation menu, select Time/Date with w/v (down/up cursor), then press u (right cursor).

The Automatic/Manual screen is displayed, with the cursor on the currently selected option.

2Press the w (down cursor) to select ‘Manual.’

3Press ENTER/OK.

The Time/Date screen appears.

4Adjust ‘Time,’ ‘AM/PM,’ ‘Year,’ ‘Month,’ ‘Date,’ and ‘Day- light saving’ if required. Select w/v (down/up cursor). Change values with t/u (left/right cursor) or the 0-9digit buttons.

5When the information is all correct, press ENTER/ OK.

6Press SYSTEM MENU repeatedly to remove all menus.

Cable/Antenna

The Cable/Antenna option allows you to overrule the Auto Cable Defect feature in case misdetection took place.

1In the Installation menu, select ‘Cable/Antenna’ with w/v (down/up cursor), then press ENTER/OK or u (right cursor).

The Cable/Antenna’ screen is displayed.

2Select ‘Cable’ or ‘Anten.’ using t/u (left/right cursor). Factory setting is ‘Auto.’

3Press ENTER/OK to store the setting.

4 Press SYSTEM MENU to exit the Cable/Antenna

English

If you have selected ‘Cable’ or ‘Anten.,’ the Auto

menu.

 

Channel Search starts. Only after a new channel

 

search, the new setting will take effect.

 

Installation

 

Cable/Anenna

 

To start auto channel

 

search - press OK

 

To exit press

SYSTEM MENU

5Press ENTER/OK to confirm. If you press SYSTEM

MENU, you will return to the Installation menu. When Auto Channel Search is complete, press SYSTEM MENU repeatedly to remove all menus.

OPERATION 23

Page 27
Image 27
Yamaha DRX-1 owner manual Time/Date Manually, Press ENTER/OK, Cable/Antenna