CONNECTING TO S VIDEO TERMINALS

 

 

If you have a VCR and a monitor equipped with “S” (high-

VCR

 

resolution) video terminals, those terminals can be connected

 

 

 

to this unit’s S VIDEO terminals. Connect the VCR’s “S” video

 

 

input and output terminals to this unit’s S VIDEO VCR OUT and

 

 

IN terminals, respectively, and connect the monitor’s “S” video

 

 

input terminal to this unit’s S VIDEO MONITOR OUT terminal.

 

 

Otherwise, connect the VCR’s composite video terminals to this

 

 

unit’s composite video terminals, and connect the monitor’s

S S

S

composite video input terminal to this unit’s composite

 

 

MONITOR OUT terminal.

 

 

In addition, if you have a DVD or LD player equipped with an

 

 

“S” video terminal, connect the DVD/LD player’s “S” video

 

 

output terminal to this unit’s S VIDEO DVD/LD terminal.

 

 

Note

 

 

If video signals are sent to both S VIDEO input and com-

 

 

posite input terminals, the signals will be sent to their

 

 

respective output terminals.

DVD/LD player

Monitor TV

S VIDEO terminals

This unit provides you with S VIDEO terminals in addition to standard VIDEO terminals.

S VIDEO terminals transmit video signals separated into luminance (Y) signals and color (C) signals. In comparison with S VIDEO terminals, standard VIDEO terminals transmit “composite” video signals.

S

S VIDEO cable

CONNECTING TO VIDEO AUX TERMINALS (ON THE FRONT PANEL)

These terminals are used to connect any video input source such as a camcorder to this unit.

S

CONNECTING WITH A MONITOR TV THAT USES A 21-PIN CONNECTOR FOR INPUT

Make a connection as shown below with a commercially available SCART-plug connector cable.

No connection

S

Monitor TV

SCART-plug connector cable

Camcorder

14