4 For a DVD/LD or TV/DBS source, the current input | 8 If desired, adjust BASS, TREBLE, BALANCE, etc. | ||
mode is also shown. |
| and use the digital sound field processor (see pages 28 | |
* To change the input mode for the DVD/LD or TV/DBS | to 29). |
| |
source, press INPUT MODE (or the button that you |
|
| |
have pressed to select the input source in step 3 on | BASS: | Turn this control clockwise to increase (or | |
the remote control) once or more until the desired |
| counterclockwise to decrease) the low- | |
input mode is shown on the display. (See page 25 for |
| frequency response. | |
details on switching the input mode.) |
|
| |
Front panel | Remote control | TREBLE: | Turn this control clockwise to increase (or |
| counterclockwise to decrease) the high- | ||
|
|
| |
|
|
| frequency response. |
|
| BALANCE: Adjust the balance of the output volume | |
| or |
| from the left and right speakers to |
|
| compensate for any sound imbalance | |
|
|
| |
|
|
| caused by the speaker location or |
|
|
| listening room conditions. |
|
|
| Front panel |
Input mode
5 Select the main speakers to be used.
Front panel
* These controls are only effective for the sound from the main speakers.
Front panel
or
Remote control
* If you use two main speaker systems, press both A and B.
6 Play the source.
7 Adjust the volume to the desired output level.
When you have finished using this unitFront panel | Remote control |
Press STANDBY/ON on the front panel again or STANDBY on the remote control to set this unit in the standby mode.
or
24