4 Set BASS, TREBLE and BALANCE to the “0” position.
Front panel
5 Press TEST so that “TEST LEFT” appears on the display.
Remote control
6 Turn up the volume.
Remote control
You will hear a test tone (like pink noise) from each speaker for about two seconds in following order: left main speaker, center speaker, right main speaker, right rear speaker and left rear speaker. The display changes as shown below.
Main (L)
Center
Main (R)
Rear (R)
Rear (L)
*If the function “CNTR” in the SET MENU mode is set to the NONE position, you will hear the center channel test tone from the left and right main speakers.
7 Adjust BALANCE so that the sound output level of the left main speaker and the right main speaker is the same.
Front panel
English
21