CONTROLS AND THEIR FUNCTIONS

FRONT PANEL

Refer to pages 35 to 40 for the remote control.

1STANDBY/ON

Press this switch to turn on the power of this unit. Press it again to set this unit in the standby mode.

Standby mode

In this state, this unit consumes a very small quantity of power to receive infrared-signals from the remote control.

2Remote control sensor

This receives signals from the remote control.

3Display

This shows various information. (Refer to page 10 for details.)

4TAPE/MD MON / EXT. DECODER

Press this button to play a tape or an MD. The “TAPE/MD MON” indicator lights up on the display.

When you press the button next, the “TAPE/MD MON” indicator goes off, “EXT. DECDR” appears on the display and you can play the signal connected to the EXTERNAL DECODER INPUT terminals.

5INPUT

Turn this selector to select the input source (VCR, VIDEO AUX, TV/DBS, DVD/LD, CD, TUNER, PHONO) that you want to listen to or watch.

The name of the selected input source appears on the display.

6VOLUME

This control is used to raise or lower the volume level.

7PHONES jack

When you use headphones, connect the headphones to the PHONES jack. You can listen to the sound to be output from the main speakers through the headphones.

When using headphones only, set both SPEAKERS A and B to the OFF position and switch off the digital sound field processor (so that no DSP program name appears on the display) by pressing EFFECT.

8