8SPEAKERS

Set A or B (or both A and B) to the ON position for the main speaker system (connected to this unit) that you want to use. Set the button(s) for the main speaker system you don’t want to use to the OFF position.

9EFFECT

Press this button once to switch the effect speakers (center and rear) on or off. If you turn off the effect by using EFFECT, all Dolby Digital and DTS audio signals are directed to the main left and right channels. In that case, the left and right channel signal levels may not match.

0PROGRAM selector

Press one of these buttons to select a DSP program.

The name of the selected program appears on the display.

qTone controls

These controls are only effective for the sound from the main speakers.

BASS

Use this control to increase or decrease the low-frequency response. The “0” position produces a flat response.

TREBLE

Use this control to increase or decrease the high-frequency response. The “0” position produces a flat response.

wBALANCE

This control is only effective for the sound from the main speakers.

Turn the control to adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by the speaker location or listening room conditions.

eSET MENU

Press this button to select functions in the SET MENU mode.

rTIME/LEVEL

Press this button to select the item in the TIME/LEVEL mode.

t+/–

These buttons are used to adjust the settings of the SET MENU mode and the TIME/LEVEL mode. In the TIME/LEVEL mode, press + to increase the delay time or speaker output level. Press –to decrease the delay time or speaker output level.

yINPUT MODE

This button switches between the DVD/LD and TV/DBS input signal modes.

uVIDEO AUX terminals

Connect an auxiliary video or audio input source such as a camcorder to these terminals. If the connected video unit has an S video output terminal, connect it to the S VIDEO terminal to obtain a high-resolution picture. The source connected to these terminals can be selected by INPUT.

English

9