BASIC OPERATION

TO PLAY A SOURCE

2

3

1,7

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3,4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

5

8

4

 

 

 

 

 

 

 

 

 

7

English

When using the remote control

•Set the SELECTOR DIAL to the AMP/TUN position on the remote control.

•To operate the tuner, the CD player, DVD/LD player, tape deck, MD recorder, or other components with this remote control, set the SELECTOR DIAL to the component to be used. (See “SETUP CODES” on page 41.)

1 Set VOLUME to the “” position.

Front panel

2 Turn the power on.

Front panel

Remote control

or

3 Select the desired input source by using INPUT.

(Turn on the monitor TV for video sources.)

Front panel

Remote control

or

The name of the selected input source will appear on the display.

To play a tape or an MD

 

Press TAPE/MD MON / EXT. DECODER

Front panel

on the front panel or TAPE/MD on the

 

remote control so that the “TAPE/MD

 

MON” indicator lights up on the display.

 

To use a decoder connected to the EXTERNAL DECODER INPUT terminals

Press TAPE/MD MON / EXT. DECODER once or more on

the front panel or EXT. DEC. on the remote control so that “EXT. DECDR” appears on the display.

23