102 Chapter 8—Bus Outs
01V96—Owner’s Manual
Viewing the Stereo Out and Bus Out Settings
You can view and adjust parameter settings for the currently-selected Stereo Out or Bus Out
on the View | Parameter and Fader pages.
Viewing the Compressor and EQ Settings
To display the View | Parameter page, use the corresponding [SEL] button to select the
desired bus, then press the DISPLAY ACCESS [VIEW] button, then press the [F1] button.
The parameters on this page (and the procedure for setting them) are the same as for Input
Channels, except for the following items:
•The Stereo Out and Bus Out 1–8 Parameter pages do not contain the Gate and Phase
parameters.
•The Stereo Out Parameter page does not contain the Pair parameter.
Viewing Faders and Other Parameters
To display the View | Fader page, use the corresponding [SEL] button to select the desired
bus, then press the DISPLAY ACCESS [VIEW] button, then press the [F2] button.
The Fader page layouts for Stereo Out and Bus Out 1–8 are slightly different.
Stereo Out Fader page
ABAL
This control adjusts the level balance between the L and R channels of the Stereo Out.
BON/OFF
This button turns the Stereo Out on or off, and links with the [ON] button in the STE-
REO section.
1
2
3