Other Functions 225
01V96—Owner’s Manual
Other Functions
19
19 Other Functions
This chapter describes the 01V96’s miscellaneous functions.

Changing the Input and Output Channel Names

You can change the default name of the input channels (Input Channels 1–32, ST IN Chan-
nels 1–4) and output channels (Aux Outs 1–8, Bus Outs 1–8, Stereo Out), if you desire.

Changing the Input Channel Names

1 Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch| In
Name page appears.
Channel IDs, Short names, and Long names are listed from left to right on the page. You
can specify Short names in the parameter boxes (1) in the center column, and Long names
in the parameter boxes (2) in the right column.
2Move the cursor to the desired parameter box, then use the Parameter wheel
or the [INC]/[DEC] buttons to select a port for which you want to change
the name.
3 Press [ENTER].
The Title Edit window appears, which enables you to edit the name.
4 Edit the name, move the cursor to the OK button, then press [ENTER].
The new name is now effective.
Tip: The edited name is stored in the Input Patch library.
3
12