Control Surface 19
01V96—Owner’s Manual
2
Control Surface & Rear Panel
LAYER Section
A[1–16]/[17–32] buttons
These buttons select an Input Channel layer as the layer controlled in the Channel Strip sec-
tion. When the [1–16] button is turned on, you can control Channels 1–16. When the
[17–32] button is turned on, you can control Channels 17–32. (See page 31 for more infor-
mation on the Input Channel layers.)
B[MASTER] button
This button selects the Master Layer as the layer controlled in the Channel Strip section. You
can use this layer to control Bus Outs and AUX Sends. (See page 31 for more information
on the Master layer.)
C[REMOTE] button
This button selects the Remote Layer as the layer controlled in the Channel Strip section.
You can use this layer to control external MIDI devices or computer-based DAWs. (See
page 185 for more information on the Remote layer.)
Display Section
ADisplay
This is a 320 x 240 dot LCD display with a backlight.
BStereo meters
These 12-segment level meters display the final output level of the Stereo Bus.
CContrast control
This control adjusts the display contrast.
D[F1]–[F4] buttons
These buttons select a page from a multi-page screen. Selecting a tab at the bottom of the
screen using one of these buttons displays the corresponding page. (See page 28 for more
information on displaying a page.)
Tip: The ST IN section is not affected by the layer settings.
1-16 17-32 MASTER REMOTE
LAYER

1 2 3

STEREO
OVER
0
-3
-6
-9
-12
-15
-18
-24
-30
-36
-48
4
1
5
2
3
6