Yamaha Mixing Console 122 , Input Patching

122 Chapter 10—Input & Output Patching
01V96—Owner’s Manual
Input Patching
Follow the steps below to change the Input Patch.
1 Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | In
Patch page appears.
Inputs, ADAT IN channels, and slot channels that are currently assigned to Input Channels
are shown in the parameter boxes (1) below the channel numbers. The parameter indica-
tors are explained below:
2 Move the cursor to an input patch parameter you wish to change, then
rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the
patching.
The long name of the currently-selected channel is
indicated in the upper-right corner of the screen (1).
Below the channel name is the long name of the
selected input channel (2). (See page 94 for informa-
tion on changing channel names.)
3 Press [ENTER] to confirm the change.
Parameter value Description
–No assignment
AD1–AD16 INPUT connectors 1–16
ADAT1–ADAT8 ADAT IN Input Channels 1–8
SL-01–SL-16 Slot Channels 1–16
FX1-1 & FX1-2 Outputs 1 & 2 of Internal Effects Processor 1
FX2-1 & FX2-2 Outputs 1 & 2 of Internal Effects Processor 2
FX3-1 & FX3-2 Outputs 1 & 2 of Internal Effects Processor 3
FX4-1 & FX4-2 Outputs 1 & 2 of Internal Effects Processor 4
2TD-L & 2TD-R 2TR DIGITAL IN (L/R)
Tip:
•You can patch an input signal to multiple Input Channels.
•You can store the Input Patch settings to the Input Patch library. Refer to Chapter 16 for more
information.
1
1
2