Yamaha Mixing Console E, F, 6, G, H, I

142 Chapter 12—Surround Pan
01V96—Owner’s Manual
ELFE
This parameter control sets the level of the LFE (Low Frequency Effects) Channel signal
routed to the subwoofer, and appears only in 5.1 and 6.1 Surround modes.
FF/R
In 6.1 Surround mode, F and R parameter controls appear. The F parameter control
determines how the Front Center signal is fed to the Left and Right channels, and the R
parameter control determines how the rear surround signal is fed to the Left and Right
surround channels.
6DIV
This parameter control, instead of the F/R parameter control, appears in 3-1 or 5.1 Sur-
round mode, and determines how the Center signal is fed to the Left, Right, and Center
channels. It is expressed as a percentage ranging from 0 to 100%. When you set the
parameter to 100, the Center signal is fed to only the Center channel. When you set the
parameter to 0, the Center signal is fed to only the Left and Right channels. When you
set the parameter to 50, the Center signal is fed equally to the Left, Right, and Center
channels.
GLINK
This button is available only in 6.1 Surround mode. When you turn on this button, the
F and R controls are set to the same value, and linked together.
HST LINK
Turning on this button links the surround pan parameters of two Input Channels that
are currently displayed on the page (Stereo Link function). You can link the surround
pan parameters of two channels regardless of whether they are paired.
IPATTERN
When Input Channels are linked by the Stereo Link function, the seven patterns select-
able here determine how the linked surround pan moves via the Parameter wheel and
the [INC]/[DEC] buttons.
3Select one of seven trajectory patterns by turning on the corresponding tra-
jectory pattern button.
The following patterns are available:
•......................The sound image moves between left and right.
40 5636 40