Yamaha Mixing Console Creating a Custom Layer by Combining Channels (User Assignable Layer)

Creating a Custom Layer by Combining Channels (User Assignable Layer) 229
01V96—Owner’s Manual
Other Functions
19
•EQ...................................Copies the EQ parameter values.
CDisplay Brightness
This parameter sets the brightness of the LED indicators in the range of 1 through 4.
Creating a Custom Layer by Combining Channels (User
Assignable Layer)
If you set the Remote Layer target to “USER ASSIGNABLE,” you can create a custom layer
by combining any 01V96 channels (excluding the Stereo Out). This custom layer is called
“User Assignable layer.”
1 Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly until the
DIO/Setup| Remote page appears.
2 Set the TARGET parameter to USER ASSIGNABLE, then press [ENTER].
A confirmation window appears.
3 Move the cursor to the YES button, then press [ENTER].
The 01V96 displays the page shown below.
4Select the channels you wish to assign to the User Assignable layer using the
1–16 parameter boxes (1).
You can store up to four 16-channel setups in four banks by switching Banks 1–4 via the
BANK 1–4 buttons.
5Use the LAYER [REMOTE] button to assign or recall the User Assignable layer.
You can use the faders and [ON] buttons to control the assigned channels.
Tip: You can reset the assignment to default by moving the cursor to the CLEAR button and
pressing [ENTER].
1