■Using the remote control
The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.
1234
30º | 30º | Approximately 6 m (20 ft) | |
|
| ||
|
|
|
|
WInfrared window
Outputs infrared control signals. Aim this window at the component you want to operate.
VTRANSMIT indicator
Flashes while the remote control is sending infrared signals.
KOperation mode selector
The function of some buttons depends on the operation mode selector position.
AMP
Operates the amplifier function of this unit.
SOURCE
Operates the component selected with an input selector button (see page 61).
TV
Operates the TV assigned to DTV/CBL (see page 60).
y
To set the remote control codes for other components, see page 62.
Notes
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–places of high humidity, such as near a bath
–places of high temperature, such as near a heater or stove
–places of extremely low temperatures
–dusty places
Connections
PREPARATION
English