SET MENU

■Input rename B)INPUT RENAME

Use this feature to change the name of the input source that appears in the OSD and in the front panel display.

2 INPUT MENU

B)INPUT RENAME

DVD -> DVD

[p]/[[]:Position [p]/[p]:Chara.

1 Press one of the input selector buttons (A) to select the input source you want to change the name of.

 

MD

MULTI CH IN

 

CD

CD-R

 

 

 

CBL

 

 

DVD

DTV

TUNER

XM

DOCK

 

 

 

V-AUX

DVR

 

 

2Set the operation mode selector (K) to AMP and then press D l/ hon the remote

control to place the “_” (underscore) under the space or the character you want to edit.

3Press D k/ nto select the character you want to use and then press D l/ hto move

to the next space.

Notes

•You can use up to 8 characters for each input.

•Press D nto change the character in the following order, or press D kto go in the reverse order:

A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#, *, –, +, etc.)

4Repeat steps 1 through 3 to rename each input source.

5Press D ENTER to exit from “INPUT

RENAME”.

■Volume trim C)VOLUME TRIM

Use this feature to adjust the output volume of each source. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources.

Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL, V-AUX, DVR, DOCK,

MULTI CH IN, XM Control range: –6.0 to +6.0 dB Control step: 1.0 dB

Initial setting: 0.0 dB

2 INPUT MENU

C)VOLUME TRIM

DVD

DVD ;;;;;;0.0dB

[p]/[[]:Adjust [RETURN]:Exit

Note

You can only adjust the value for DOCK when your iPod is stationed in the Yamaha Universal Dock connected to this unit.

■Decoder mode D)DECODER MODE

2 INPUT MENU

D)DECODER MODE

.>AUTO LAST

CD ;;;;AUTO

DVD ;;;;AUTO

DTV/CBL ;;;;AUTO

[p]/[p]:Up/Down [p]/[[]:Select

Decoder select mode

Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit.

Choices: AUTO, LAST

•Select “AUTO” if you want this unit to automatically detect the type of input signals and select the appropriate decoder mode.

•Select “LAST” if you want this unit to automatically select the last decoder mode used the connected input source.

DTS decoder prioritize setting

Choices: AUTO, DTS

•Select “AUTO” if you want this unit to automatically detect input signal types and select the appropriate input mode.

•Select “DTS” when you play back a DTS-CD.

56 En