Yamaha RX-V461 36 En, DSP), (SILENT CINEMA), standard decoders, (Straight decoding mode), ■Enjoying unprocessed input sources, ■Enjoying 2-channelsources using the

Sound field programs

■Enjoying 2-channel sources using the

standard decoders

Signals input from 2-channel sources can also be played back on multi-channels.

Set the operation mode selector (K) to AMP and then press Q SUR. DECODE repeatedly to

select a decoder.

You can select from the following decoders depending on the type of source you are playing and your personal preference.

STANDARD	Functions
PRO LOGIC	Dolby Pro Logic processing for any
	sources
PLII Movie	Dolby Pro Logic II processing for
	movie sources
PLII Music	Dolby Pro Logic II processing for
	music sources
PLII Game	Dolby Pro Logic II processing for
	game sources
Neural	Neural Surround processing for any
	sources

■Using sound field programs without surround speakers (Virtual CINEMA

DSP)

Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers by creating virtual speakers.

If you set “SUR. L/R SP” to “NONE” (see page 52), Virtual CINEMA DSP activates automatically whenever you select a CINEMA DSP or HiFi DSP program (see page 35).

Note

Virtual CINEMA DSP will not activate even when “SUR. L/R SP” is set to “NONE” (see page 52) in the following cases:

–When “5ch Stereo” (see page 35) is selected.

–When headphones are connected to the PHONES jack.

■Enjoying multi-channel sources and sound field programs with headphones

(SILENT CINEMA)

SILENT CINEMA allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS sources, through ordinary headphones. SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs (see page 35). When activated, the SILENT CINEMA indicator lights up in the front panel display.

Note

SILENT CINEMA does not activate when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 31).

■Enjoying unprocessed input sources

(Straight decoding mode)

When this unit is in the “STRAIGHT” mode, multi- channel sources are decoded straight into the appropriate channels without any additional effect processing. 2- channel stereo sources are output from only the front left and right speakers.

Press BSTRAIGHT (or set the operation mode selector (K) to AMP and then press

SSTRAIGHT) to select “STRAIGHT”.

To deactivate the “STRAIGHT” mode, press

BSTRAIGHT (or S STRAIGHT) again so that “STRAIGHT” disappears from the front panel display.

36 En