Troubleshooting

AUTO SETUP

Before AUTO SETUP

Error message

Cause

Remedy

See

page

 

 

 

Connect MIC!

Optimizer microphone is not connected.

Connect the supplied optimizer microphone

 

 

 

to the OPTIMIZER MIC jack on the front

22

 

 

panel.

 

 

 

 

 

Unplug HP!

Headphones are connected.

Unplug the headphones.

 

 

 

 

During AUTO SETUP

 

 

 

Error message

Cause

Remedy

See

page

 

 

 

E-1:NO FRONT SP

Front L/R channel signals are not detected.

Check the front L/R speaker connections.

12

 

 

 

 

E-2:NO SUR.SP

A surround channel signal is not detected.

Check the surround speaker connections.

12

 

 

 

 

E-3:NOISY

Background noise is too loud.

Try running “AUTO SETUP” in a quiet

 

 

environment.

 

 

 

 

 

 

 

 

 

Turn off noisy electric equipment like air

 

 

 

conditioners or move them away from the

 

 

optimizer microphone.

 

 

 

 

 

E-4:NO MIC

The optimizer microphone was unplugged

Connect the supplied optimizer microphone

 

 

during the “AUTO SETUP” procedure.

to OPTIMIZER MIC jack on the front

22

 

 

panel.

 

 

 

 

 

E-5:USER CANCEL

The “AUTO SETUP” procedure was

Run “AUTO SETUP” again.

22

 

cancelled due to user activity.

 

 

 

 

 

 

 

 

E-6:INTERNAL ERROR

An internal error occurred.

Run “AUTO SETUP” again.

22

 

 

 

 

INFORMATION

ADDITIONAL

 

 

English

69 En