You can create your original SCENE templates for each SCENE button. You can refer to the preset 16 SCENE templates to create the original SCENE templates.
■Customizing the preset SCENE
templates
Use this feature to customize the preset SCENE templates.
Select a SCENE template | Create the original SCENE | |
|
| template |
|
|
|
|
|
|
SCENE template library
(Image)
1
Assign to the SCENE
button
1Turn on the video monitor connected to this unit.
2Set the operation mode selector (K) to AMP
and then press and hold the desired F SCENE button for 3 seconds.
The SCENE template customizing screen appears on the video monitor.
AMP |
|
SOURCE | 1 |
TV
3 seconds
Note
When the SCENE template you want to customize is not assigned to any of the F SCENE button, press D l/ h repeatedly to recall the desired SCENE template on the menu screen.
Selecting the SCENE templates
3Press D k/ nto select the desired parameter of the SCENE template and then D l/ hto
select the desired value of the selected parameter.
You can adjust the following parameters for a SCENE template:
•INPUT: The input source component
•MODE: The active sound field programs, STRAIGHT or DIRECT STEREO mode (see pages 33 and 36)
•NIGHT: The night listening mode setting (see page 33)
−SYSTEM: Keeps the current night listening mode.
−CINEMA: Sets the night listening mode to the CINEMA mode.
−MUSIC: Sets the night listening mode to the MUSIC mode.
4Press the F SCENE button again to confirm the edit.
1
y
An asterisk mark (*) appears by the name of the original SCENE template.
Notes
•Once the desired SCENE templates are assigned to the corresponding F SCENE buttons, you may need to set the
input source of the SCENE template on the remote control. See page 59 for details.
•You can create a customized SCENE template for each F SCENE button, and if you create another customized
SCENE template, this unit overwrites the old customized SCENE template with the new one.
•The newly created template is only available for the assigned F SCENE button.
■Renaming the SCENE templates
Select “SCENE” in step 3 of “Customizing the preset SCENE templates” and then press
DENTER.
•Press D k/ nto select the desired character.
•Press D l/ hto place “_” (underscore) under the space or the desired character.
•Press E RETURN to cancel the new name.
•Press D ENTER to confirm the new name.
OPERATION | BASIC |
|
|
English