Maximum volume MAX VOL.
Use this feature to set the maximum volume level. This feature is useful to avoid the unexpected loud sound by mistake. For example, the original volume range is 16 dB to
Control range: 16 dB, 10 dB to
Control step: 5 dB
Note
The “MAX VOL.” setting takes priority over the “Initial Volume” setting. For example, if “INI VOL.” is set to
Initial volume INI VOL.
Use this feature to set the volume level when the power of this unit is turned on.
Choices: Off,
Control step: 1 dB
Note
The “MAX VOL.” setting takes priority over the “INI VOL.” setting.
SET MENU
2 INPUT MENUUse this menu to reassign the input jacks, select the decoder mode or rename the input source.
;MANUAL SETUP
2 INPUT MENU
.A)INPUT ASSIGN B)INPUT RENAME C)VOLUME TRIM
D)DECODER MODE E)MULTI CH SET
[p]/[p]:Up/Down [ENTER]:Enter
■Input assignment
A)INPUT ASSIGN
Use this feature to assign the input jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components.
Once the input jacks are reassigned, you can select the corresponding component by using DINPUT l/ h(or the input selector buttons (A)).
For COAXIAL INPUT jack 1
COAXIAL IN (1)
Choices: (1) CD,
2 INPUT MENU
A)INPUT ASSIGN
COAXIAL IN
.(1);;;;; DVD
( DVD )
[p]/[[]:Select
For OPTICAL INPUT jacks 2 and 3
OPTICAL IN (2)
OPTICAL IN (3)
Choices: (2) CD,
(3)CD,
2 INPUT MENU
A)INPUT ASSIGN
OPTICAL IN
.(2);;;;;DTV/CBL (DTV/CBL )
(3);;;;; CD
( CD )
[p]/[[]:Select
OPERATION | ADVANCED |
|
|
Note
You cannot select a specific item more than once.
English