Additional operations

Selecting the component connected to the MULTI CH INPUT jacks as the input source

Press DINPUT l/ hrepeatedly (or press

AMULTI CH IN) so that “MULTI CH” appears in the front panel display.

y

Use “MULTI CH SET” menu in “INPUT MENU” to set the parameter for MULTI CH INPUT (see page 57).

Notes

Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source.

When headphones are used, signals are output only from the front left and right channels.

Selecting the front speaker set

Press 9SPEAKERS on the front panel repeatedly to turn on or off the set of front speakers connected to the FRONT A or FRONT B speaker terminals.

The active front speaker set changes as follows:

FRONT A

FRONT B

OFF

Note

Turn off the volume level of this unit when you switch the front speaker setting.

Playback

Using the Zone B feature

When you set “FRONT B” to “ZONE B” (see page 51), you can use the speakers connected to the FRONT B speaker terminals in another room (Zone B).

Press 9SPEAKERS on the front panel repeatedly to turn on or off the Zone B speakers.

When you activate the Zone B speakers, all the speakers in the main room are muted.

Notes

You cannot activate both the main room and Zone B speakers simultaneously.

If you select CINEMA DSP sound field program and activate the Zone B speakers, Virtual CINEMA DSP activates automatically (see page 36).

Selecting audio input jacks
(AUDIO SELECT)

This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch between input jacks when more than one input jack is assigned to the same input source.

y

We recommend setting audio input jack select to “AUTO” in most cases.

You can adjust the default audio input jack select of this unit by using “AUDIO SELECT” in “OPTION MENU” (see page 58).

Press EAUDIO SELECT (or I AUDIO SEL)

repeatedly to select the desired audio input jack select setting.

DVR V-AUX DTV/CBL DVD MD/CD-R TUNER CD XM

A.SEL:AUTO

 

 

Audio input jack

 

 

select setting

AUTO

Automatically selects input signals in the

 

following order:

 

(1)

Digital signals

 

(2)

Analog signals

ANALOG

Selects only analog signals. If no analog

 

signals are input, no sound is output.

Note

This feature is not available when no digital input jacks are assigned to the currently selected input source.

OPERATION

BASIC

 

 

English

31 En