■Editing sound fields parameters
You can enjoy good quality sound with the factory preset parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room.
1While listening to a source, set the operation mode selector (K) to AMP and then press D k/ nto select the desired parameter.
2Press D l/ hto change the parameter value.
Note
You cannot change parameter values when “MEMORY GUARD” in “OPTION MENU” is set to “ON” (see page 58).
Sound field programs
y
Initial settings are indicated in bold under each parameter.
For Pop/Rock, Hall, Jazz, Game, TV Sports, Movie Spacious and Movie Dramatic:
DSP level DSP LEVEL
Function: | Adjusts the effect level. |
Choices: | MIN, MID, MAX |
For PRO LOGIC II Music: | |
Panorama PANORAMA | |
Function: | Sends stereo signals to the surround |
| speakers as well as the front speakers for |
| a wraparound effect. |
Choices: | OFF, ON |
Dimension DIMENSION | |
Function: | Gradually adjusts the sound field either |
| towards the front or towards the rear. |
Control range: | |
| front), initial setting is STD (standard). |
Center width CT WIDTH | |
Function: | Adjusts the center image from all three |
| front speakers to varying degrees. A |
| larger value adjusts the center image |
| towards the front left and right speakers. |
Control range: 0 (center channel sound is output only | |
| from center speaker) to 7 (center channel |
| sound is output only from front left and |
| right speakers), initial setting is 3. |
For Music Enh. 2ch and Music Enh. 5ch | |
Effect level |
|
Function: | Adjusts the effect level. |
Choices: | LOW, HIGH |
OPERATION | BASIC |
|
|
English