If an error screen appears

Press D k/ n/ l/ hto select “RETRY” or “EXIT” and then press D ENTER.

The following display is an example where “E-5:USER CANCEL” appears in the OSD.

AUTO:ERROR

.E-5:USER CANCEL

Don't operate any function

>RETRY EXIT

[]/[]:Up/Down [ENTER]:Enter

Choices: RETRY, EXIT

Select “RETRY” to retry the “AUTO SETUP” procedure.

Select “EXIT” to exit from the “AUTO SETUP” procedure.

Optimizing the speaker setting for your listening room

If “WARNING” appears

When this unit detects potential problems during the “AUTO SETUP” procedure, “WARNING” appears in the “RESULT:EXIT” display. Check the warning messages to correct your speaker settings.

Note

Warnings differ from errors in that warnings do not cancel the “AUTO SETUP” procedure.

1 Make sure the pointer is pointing at

 

 

“WARNING” and then press D ENTER to

PREPARATION

display the detailed information about the

 

warning.

 

 

The number on the right of “WARNING” indicates

 

the number of warning messages.

 

AUTO:RESULT

 

 

 

 

. WARNING(1)

 

RESULT

 

 

SP :

3/2/0.1

 

DIST:

3.2/3.5m

 

LVL :

-2/+2dB

 

>SET

CANCEL

 

[]/[]:Up/Down [ENTER]:Enter

2Press D l/ hrepeatedly to toggle between the warning displays.

WARNING:W-1

<OUT OF PHASE> Reverse Channel

--FR

CENTER

----

[]/[]:Up/Down [ENTER]:Return

y

For details about each warning message, see the “AUTO SETUP” section in “Troubleshooting” on page 65.

When the corresponding warning message is not applicable to a speaker, “– –” is displayed instead.

3Press D ENTER to return to the top “RESULT:EXIT” display.

English

25 En