100
The simplified filter parameters provided here have been specifically created for
fast, efficient filter programming.
For full filter parameters see page 65.
[VOICE] → [QUICK EDIT] → [MENU] → 3:Filter → [ENTER/YES]
Type (Filter type)
Range: 0 … 15
Controls: [CS3], [-1] [+1], Dial
Selects either the filter defined by the current filter parameter settings (page
65), or one of 15 preset filter types for the current voice. The filter types are:
Quick Edit Filter Types
0:-------- Full-edit filter
1:VeloSoft Velocity sensitive, soft response
2:VeloWide Velocity sensitive, wide response
3:VeloHard Velocity sensitive, hard response
4:VeloReso Velocity sensitive, resonant
5:SynBass1 Synthesizer bass 1
6:SynBass2 Synthesizer bass 2
7:SynBras1 Synthesizer brass 1
8:SynBras2 Synthesizer brass 2
9:Sweep Sweep-frequency filter
10:SlowAtak Slow-attack filter
11:LPF_Init Initialized LPF
12:HPF_Init Initialized HPF
13:BPF_Init Initialized BP
14:BEF_Init Initialized BEF
15:Thru No filter
Coff (Cutoff frequency)
Range: 0 … 127
Controls: [CS6], [-1] [+1], Dial
Sets the cutoff frequency of the selected filter.
Lower cutoff values produce a lower cutoff frequency and higher values
produce a higher cutoff frequency. If the “Thru” filter type is selected, no
cutoff frequency can be set and “---” appears on the display in place of the
parameter.
VOICE EDIT MODE / QUICK EDIT
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
3: FILTER