206
Ofst (Offset)
Range: -99 … +99
Controls: [CS8], [-1] [+1], Dial
Press [F1] if you want to modify the velocity values of an instrument in
one pattern, or [F2] if you want to modify the velocity values of an instrument
in all patterns. If you select “PTN”, the current pattern name is shown between
parentheses on the lower display line and [CS5] can be used to select the
pattern in which the velocity values are to be modified. Use [CS6] to select the
instrument (key) for which the velocity values are to be modified. Use [CS7] to
set the “ratio” between the lower and higher velocity values (a setting of
“100%” maintains the original relationship between the notes, lower values
produce a narrower dynamic range, and higher values produce a broader dy-
namic range). Use [CS8] to specify the amount of offset (“-” settings reduce
the velocity while “+” settings increase the velocity).
Press [ENTER/YES] to begin the velocity modify procedure. The following
confirmation display will appear:
PATTERN EDIT MODE / PATTERN JOB
Press [ENTER/YES] again to confirm that you want to go ahead with the
velocity modify operation, or press [EXIT/NO] to cancel.
When the velocity data has been modified, “Completed!” will appear briefly
on the display, then the display will return to the pattern play mode.