22
7: CS ENABLE[PERFORMANCE] → [EDIT] → [MENU] → 1:Layer → [ENTER/YES] → [ENTER/YES] →
→ [MENU] → 7:CS Enable → [ENTER/YES]
The CS3 and CS4 sliders can be used to control the level of individual layers or
specified groups of layers in the performance play mode. This screen specifies which
slider controls which layers.
PERFORMANCE EDIT MODE / 1:Layer
The name of the currently selected voice/layer is shown in the upper right
corner of the display. The characters “ABCD” to the right of the voice name
indicate the status of each voice: a capital letter if the voice is on, a lower-case
letter if the voice is muted, and a dash if the voice is off.
CS3 Enable
Range: on, off
Controls: [CS1], [CS3], [CS5], [CS7], [-1] [+1], Dial
The [CS1], [CS3], [CS5], and [CS7] sliders turn CS3 control of layers A,
B, C, and D on or off, respectively.
Voices that are turned off and are not available for editing are indicated by
“---” on the display.
CS4 Enable
Range: on, off
Controls: [CS2], [CS4], [CS6], [CS8], [-1] [+1], Dial
The [CS2], [CS4], [CS6], and [CS8] sliders turn CS4 control of layers A,
B, C, and D on or off, respectively.
Voices that are turned off and are not available for editing are indicated by
“---” on the display.
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8