Yamaha SY85 9: SONG INITIALIZE

156 SONG EDIT MODE / MULTI EDIT
When you want to program a totally new multi setup “from scratch,” rather than
editing an existing setup, use this function to initialize all multi parameters.
9: SONG INITIALIZE
[SONG] → [MULTI EDIT] → [MENU] → 9:Initialize → [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Press [ENTER/YES] to begin the initialize procedure. The following confir-
mation display will appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
initialize operation (which will erase all current edited data), or press [EXIT/
NO] to cancel.
When the multi data has been initialized, “Completed!” will appear briefly
on the display, then the display will return to the mode that was engaged prior
to calling the multi initialize function.