199SONG EDIT MODE / SONG JOB
Increases or decreases the gate times (length) of all notes in the specified track
and range of measures.
This job is not available when the rhythm track (track 9) is selected.
16: GATE TIME MODIFY
[SONG] [A]~[H] [SONG JOB] [MENU] 16:Gate Time Modify [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Press [ENTER/YES] again to confirm that you want to go ahead with the
gate time modify operation, or press [EXIT/NO] to cancel.
When the gate time data has been modified, “Completed!” will appear
briefly on the display.
Meas (First & last measure numbers)
Range: 001 … 999
Controls: [CS5], [CS6], [-1] [+1], Dial

Rate (Gate time ratio)

Range: 000 … 200
Controls: [CS7], [-1] [+1], Dial
Ofst (Offset)
Range: -99 … +99
Controls: [CS8], [-1] [+1], Dial
Use the GROUP [A] through [H] keys to select the track on which the gate
time modify operation is to be performed (A = track1, B = track 2, and so on).
The LED of the selected track will glow red while the LEDs of all other tracks
containing data glow green.
Use [CS5] and [CS6] to specify the first and last measure numbers in the
range of measures over which you want to modify the gate time data. Use
[CS7] to set the “ratio” between the shorter and longer gate time values (a
setting of “100%” maintains the original relationship between the notes, lower
values produce a narrower gate time range, and higher values produce a broader
gate time range). Use [CS8] to specify the amount of offset (“-” settings
shorten the gate time while “+” settings increase the gate time).
Press [ENTER/YES] to begin the gate time modify procedure. The follow-
ing confirmation display will appear: