176 SONG EDIT MODE / SONG EFFECT
All of the modulation-type effects — chorus, flanging, etc. — require LFO con-
trol. The SY85 has an independent effect LFO that is set up by the following param-
eters.
10: CONTROL LFO
[SONG] → [EFFECT EDIT] → [MENU] → 10:Control LFO → [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Ω≈
Wave (LFO waveform)
Range: tri, dwn, up, squ, sin, S/H, 1tm
Controls: [CS4], [-1] [+1], Dial
Determines the waveform of the effect LFO.
“tri” = Triangle. “dwn” = Downward sawtooth.
“up” = Upward sawtooth. “squ” = Square.
“sin” = Sine. “S/H” = Sample and hold.
“1tm” = Upward 1-shot.
If a controller is assigned to the “Wave” parameter (page 174), an inverse
“c” will appear to the right of the parameter.
Speed (LFO speed)
Range: 0 … 99
Controls: [CS6], [-1] [+1], Dial
Sets the speed of the effect LFO.
“0” is the slowest speed setting, producing an LFO speed of approximately
0 Hertz. The fastest setting of 99 produces an LFO speed of approximately 25
Hertz.
If a controller is assigned to the “Speed” parameter (page 174), an inverse
“c” will appear to the right of the parameter.
Delay
Range: 0 … 99
Controls: [CS8], [-1] [+1], Dial
Sets the delay time between the beginning of a note and the beginning of
effect LFO operation for the selected element.
The minimum setting “0” results in no delay, while the maximum setting of
“99” produces a delay of approximately 2.66 seconds before the effect LFO
begins operation.
If a controller is assigned to the “Delay” parameter (page 174), an inverse
“c” will appear to the right of the parameter.