198 SONG EDIT MODE / SONG JOB
Increases or decreases the velocity values of all notes in the specified track and
range of measures.
This job is not available when the rhythm track (track 9) is selected.
15: VELOCITY MODIFY[SONG] → [A]~[H] → [SONG JOB] → [MENU] → 15:Velocity Modify → [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Meas (First & last measure numbers)
Range: 001 … 999
Controls: [CS5], [CS6], [-1] [+1], Dial
Rate (Velocity ratio)
Range: 000 … 200
Controls: [CS7], [-1] [+1], Dial
Ofst (Offset)
Range: -99 … +99
Controls: [CS8], [-1] [+1], Dial
Use the GROUP [A] through [H] keys to select the track on which the
velocity modify operation is to be performed (A = track1, B = track 2, and so
on). The LED of the selected track will glow red while the LEDs of all other
tracks containing data glow green.
Use [CS5] and [CS6] to specify the first and last measure numbers in the
range of measures over which you want to modify the velocity data. Use [CS7]
to set the “ratio” between the lower and higher velocity values (a setting of
“100%” maintains the original relationship between the notes, lower values
produce a narrower dynamic range, and higher values produce a broader dy-
namic range). Use [CS8] to specify the amount of offset (“-” settings reduce
the velocity while “+” settings increase the velocity).
Press [ENTER/YES] to begin the velocity modify procedure. The following
confirmation display will appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
velocity modify operation, or press [EXIT/NO] to cancel.
When the velocity data has been modified, “Completed!” will appear briefly
on the display.