144
4: DRUM VOICE INITIALIZE
[VOICE] → [JOB] → [MENU] → 2:Initialize → [ENTER/YES]
When you want to program a totally new drum voice “from scratch,” rather than
editing an existing voice, use this function to initialize all drum voice parameters.
Use [CS6] to select the type of drum voice to be initialized. Press [ENTER/
YES] to begin the initialize procedure. The following confirmation display will
appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
initialize operation (which will erase all current edited data), or press [EXIT/
NO] to cancel.
When the drum voice data has been initialized, “Completed!” will appear
briefly on the display, then the display will return to the mode that was en-
gaged prior to calling the drum voice initialize function.
DRUM VOICE EDIT MODE / JOB
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8