33PERFORMANCE EDIT MODE / QUICK EDIT
Other parameters that can be individually set for each performance layer are
provided in this screen: sustain enable, pitch envelope generator enable, oscillator
fixed note mode and note number.
4: OTHER CONDITIONS
[PERFORMANCE] → [QUICK EDIT] → [MENU] → 4:Other Condition → [ENTER/YES]
Use PROGRAM keys [1] through [4] (LAYER SELECT A, B, C, and D) to
select the layer to be edited.
Hold the [F1] function key (“ALL”) while editing any of the following
parameters to change its value by the same amount for all layers simultane-
ously.

Sustain

Range: off, on
Controls: [CS4], [-1] [+1], Dial
Turns sustain off or on for the selected layer. Interesting effects can be
produced by setting some layers to respond to the sustain footswitch in the
normal way, while others do not sustain at all.

PEG (Pitch EG enable)

Range: off, on
Controls: [CS5], [-1] [+1], Dial
Turns pitch envelope generator control of the selected layer off or on.

Fix (Oscillator fix)

Range: off, on
Controls: [CS6], [-1] [+1], Dial
Turns the oscillator fixed-pitch mode on or off (see page 58). The FixNote
parameter described below can be used to set the note produced when the “fix”
mode is turned on.
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8