50 PERFORMANCE EDIT MODE / JOB
1: LAYER CONTROLLER SYNC
[PERFORMANCE] [JOB] [MENU] 1:Layer Controller Sync [ENTER/YES]
This function changes the controller parameters of all voices in the selected
perfomance combination to match those of the voice assigned to the specified
“source” layer.
Use the [CS8] slider to select the source layer (A, B, C, or D) from which
the controller data is to be copied, then press [ENTER/YES] to begin the layer
controller sync procedure. The following confirmation display will appear:
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Press [ENTER/YES] again to confirm that you want to go ahead with the
operation (which will overwrite all controller data for the voices assigned to all
layers other than the source layer), or press [EXIT/NO] to cancel.
When the data has been copied, “Completed!” will appear briefly on the
display, then the display will return to the mode that was engaged prior to
calling the layer controller sync function.