Setup Menu
Setting the analog output
Set the analog output to match the playback capability of this unit.
1In “AUDIO SETUP PAGE”, press 3 /4 to highlight [ANALOG OUTPUT], and then press 2.
STEREO
Select this to change the channel output to stereo, which only delivers sound from the two front speakers.
LT/RT
Select this if this unit is connected to a Dolby Pro Logic decoder.
2Press 3 /4 to select a setting, and then press ENTER/OK to confirm your selection.
Setting the digital output
The [DIGITAL AUDIO] options are: “DIGITAL OUTPUT” and “LPCM OUTPUT”.
1In “AUDIO SETUP PAGE”, press 3 /4 to highlight [DIGITAL AUDIO], and then press 2.
2Press 3 /4 to highlight an option.
3Press 2 to enter a submenu.
DIGITAL OUTPUT
Set the digital output according to your optional audio component connections.
OFF
Select this to turn off the digital output.
ALL
Select this if you have connected the digital audio output jack to a
PCM ONLY
Select this only if your receiver is not capable of decoding
Note:
–If your receiver cannot decode DTS, no sound output from DTS signals in any mode.
LPCM OUTPUT
Select this if you have connected this unit to a
Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.
48KHz
Select this to play back discs recorded at the sampling rate of 48 kHz. All 96 kHz PCM data streams (if available) are converted to the sampling rate of 48 kHz.
96KHz
Select this to play back discs recorded at the sampling rate of 96 kHz. If the 96 kHz disc is copy protected, the digital output is automatically converted to the sampling rate of 48 kHz.
4Press 3 /4 to select a setting, and then press ENTER/OK to confirm your selection.
English
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
23 En
