Getting Started
Step 2: Turning on the power
1Connect the AC power cord to an AC outlet.
2Turn on your TV and AV receiver.
3Select the appropriate input source of the AV receiver connected to this unit. Refer to the manual supplied with your AV receiver for details.
4Turn on this unit.
5Set the TV to the correct Video IN channel (e.g. EXT1, EXT2, AV1, AV2, AUDIO/ VIDEO, etc. Refer to the manual supplied with your TV for details).
➜The front panel display lights up and the default screen appears on the TV.
About the auto standby function
This unit is automatically set to the standby mode when disc playback is stopped or paused for more than 30 minutes.
When “SCREEN SAVER” is set to “ON” (see page 22):
The background is displayed when disc playback is stopped or the paused picture is displayed for 15 minutes.
| OR |
Background | Example of a |
| paused picture |
The screen saver is displayed for another 15 minutes.
When “SCREEN SAVER” is set to “OFF” (see page 22):
The background or the paused picture is displayed for 30 minutes.
This unit is set to the standby mode.
Step 3: Setting a TV type and display
Setting a color system for your
TV
This unit is compatible with both NTSC and PAL video formats. Select the color system that matches your TV.
|
|
VIDEO SETUP PAGE |
|
TV TYPE | PAL |
TV DISPLAY | MULTI |
PROGRESSIVE | NTSC |
PICTURE SETTING |
|
COMPONENT |
|
|
|
1Press SETUP.
2Press 2 repeatedly to select “VIDEO SETUP PAGE”.
3Press 3 /4 to highlight [TV TYPE], and then press 2.
4Press 3 /4 to highlight one of the following options.
English
This unit is set to the standby mode.
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
9 En
