Yamaha Yamaha DVD Changer, DV-C6860 owner manual Troubleshooting, Problem, Solution

Troubleshooting

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center.

Problem		Solution
No power	–	Check if the AC power cord is properly connected.
	–	Press STANDBY/ON on the front panel of this unit to turn
		on the power.
No picture	–	Refer to the manual supplied with your TV for correct Video
		In channel selection. Change the TV channel until you see
		the DVD screen.
	–	Check if the TV is turned on.
	– Make sure the video signal output setting of this unit matches
		the video connection (see “Switching the YUV/RGB” on
		page 27).
	–	If you do not use progressive scan connections (using the
		component video (Y PB PR) jacks of this unit) and no picture
		is displayed on the TV, follow the steps below to turn off the
		progressive scan;
		1. Press / (OPEN/CLOSE) on the front panel to open the
		disc tray.
		2. Press 1 on the remote control.
		3. Press ANGLE on the remote control to deactivate
		progressive scan. This unit is set to Component/Interlaced
		video.
Distorted picture	–	Occasionally, a small amount of picture distortion may
		appear depending on the disc being played back. This is not
		a malfunction.
Completely distorted picture	–	Make sure the disc is compatible with this unit (see “Notes
or black/white picture with		on discs” on page 2).
DVD	–	Ensure that the TV type of this unit is set to match that of
		the disc and your TV (see “Setting a color system for your
		TV” on page 9).
The screen size looks	–	Make sure the TV setting of this unit matches the screen size
unnatural, or the caption is		of your TV (see “Setting the TV display” on page 25).
displayed only partially on the	–	Change the screen size and the aspect ratio of your TV.
TV monitor or is not displayed
at all
No sound or distorted sound	–	Adjust the volume.
	–	Check that the speakers are connected correctly.

32En